LED lamp shades

Installing LED bulbs in a car is often accompanied by unexpected problems. When you replace standard halogen bulbs with LEDs, the on-board computer may start to give errors, the bulbs may flicker or even refuse to work at all. The solution to these problems is to use special devices called decoys.

A decoy is an electronic device that simulates the electrical characteristics of a standard halogen lamp. These devices are necessary for owners of cars equipped with lighting control systems who have decided to switch to LED technology. LED decoy lamps consume significantly less electricity compared to traditional halogen ones.

When the on-board computer detects low current consumption, it interprets this as a lamp malfunction and issues a corresponding error on the dashboard. The decoy creates additional resistance in the lamp circuit, compensating for the difference in current consumption between the halogen and LED lamps. Thus, the system "thinks" that a standard lamp is installed and works without errors.

The most common problem that car owners face after installing LED lamps is the appearance of an error on the car's dashboard. The indicator signals an allegedly faulty lamp, although in fact the LED lamp is working perfectly. This is especially true for lighting control systems that constantly monitor the status of all lamps in the car.

The cheats also eliminate flickering of LED lamps and other problems with their operation. Flickering occurs because the car's electronic systems try to "warm up" the lamp by applying current pulses, as was done with halogen lamps. In some cases, LED lamps do not turn on at all due to the protective functions of the on-board computer, which blocks the operation of "faulty" lighting.

Types of LED lamp shades and their features

The simplest and cheapest type of decoys are resistor devices. They work like a regular resistor, creating additional resistance and some heating. Resistor decoys are effective, but have the disadvantage of generating heat during operation. More advanced digital Canbus adapters are more complex devices that emulate the signals of a stock lamp without significant heating. They are more expensive than resistor ones, but are more effective and reliable in long-term operation.

Specialized ballasts are used for different types of lighting. The popular LED lamps T10-2835-12smd ballast white are usually used for parking lights and interior lighting. These lamps with a T10 base have 12 SMD 2835 LEDs and provide bright white light. For their stable operation, appropriate low-power ballasts are required.

The S85 LED car lamp is used in special applications and requires individual selection of the ballast depending on the specific vehicle system. The T10-3014-27smd lamps are equipped with 27 smaller LEDs, which allows for more uniform light distribution. The T20-2835-15smd LED car lamp with a T20 base and 15 powerful LEDs is usually used for brake lights and turn signals, therefore it requires more powerful ballasts.

Correct selection and installation of LED fog lamps

When choosing a glow plug, it is important to consider the power of the device, which should correspond to the difference between the consumption of a standard halogen lamp and an LED lamp. Usually this is from 10 to 50 W, depending on the type of lighting. The quality of glow plugs is of paramount importance for safe and reliable operation. Low-quality devices can overheat, fail, or even damage the car's wiring. It is important to pay attention to the case material, the quality of soldering, and compliance with safety standards.

Different car brands have different lighting control systems. Some fog lights are designed specifically for specific car brands, taking into account the specifics of their electronic systems. Universal fog lights are suitable for most cars, but in some cases compatibility problems may arise.

Installing the resistors usually does not require special knowledge or tools. The devices are connected in parallel to the LED lamp or integrated directly into the wiring. It is important to observe the polarity of the connection and ensure that all connections are securely fastened. When installing resistor resistors, it is necessary to take into account their heating during operation and ensure proper ventilation for heat dissipation.

Using high-quality LED lamp adapters and adapters allows you to completely eliminate on-board computer errors, ensure stable operation of LED lighting, preserve all functions of automotive electronics and obtain long-term reliability of the lighting system. Properly selected adapters guarantee that the transition to LED technology will be smooth.

LEDUA online store offers a wide range of quality LED lamp covers for all types of LED lamps, including T10-2835-12smd, S85, T10-3014-27smd and T20-2835-15smd. We guarantee the compatibility of our devices with most modern cars and provide detailed advice on the right choice. Our covers have been thoroughly tested and ensure stable operation of any LED lighting without errors and flickering. Order LED lamp covers for LED lamps at LEDUA and enjoy trouble-free operation of car lighting!